Model | BAC101-SS-532/ BAC101-SS-785/ BAC101-SS-785-HT | BAC101-HS-532/ BAC101-HS-785 |
---|---|---|
Excitation wavelength | 532 nm or 785 nm | |
Raman cut-off | 150cm-1 | |
Rayleigh rejection | >>OD6 | |
Shaft Material | 316 SS | Hastelloy C-276 |
Shaft Length | 8”(203.2 mm) | |
Shaft Diameter | 0.5” (12.7 mm) | |
Shaft Wall thickness | 0.109” (3.27 mm) |
0.065” (1.65 mm) |
Working Distance | 0.5 mm in air, 0.8 mm in water |
0.4 mm in air, 0.6 mm in water |
Probe Shaft Operating Temperature* | -55 to 200°C |
-100 to 300°C |
Maximum probe body operating temperature* |
80°C | |
Humidity | Non-condensing | |
Shaft window material | Epoxied sapphire ball lens (Kalrez-sealed fused silica, or sapphire options) |
Gold sealed sapphire ball lens (Kalrez-sealed fused silica, or sapphire options) |
Shaft Seal Pressure Certification | 6000 psi (413 bar) | |
Shaft Chemical Compatibility | Suitable for continuous exposure to dilute and concentrated acids, bases and most organic solvents including ethanol, THF, ethyl acetate, acetone, DCM, toluene, pentane and acetonitrile |
Suitable for continuous exposure to dilute and concentrated (hot and cold) acids, bases and organic solvents. Avoid prolonged exposure to aqua regia. |
Fiber length | 1.5 m in total; 1.0 m at common end and 0.5 m on each branch | |
Excitation fiber | 105 μm core; FC/PC terminated | |
Collection fiber | 200 μm core, SMA 905 terminated for standard models; 300 μm core, FC/PC terminated for HT models |
|
* The probe body and shaft are not sealed. To prevent irreversible damage caused by condensation on internal optic surfaces, do not subject any part of the probe to a temperature below the dew point. If needed, use a purged probe. |