Raman Probes and Accessories
Measure both solid and liquid samples using a variety of Raman probe configurations. Lab probes include optional shafts and sampling accessories to enable easy measurement of solid and liquid samples.
Step 3: Choose your Fiber Optic Raman Probe and Sampling Accessories
Why is the choice of the Raman Probe important?
The final piece in designing your 785 nm DIY Raman system is choice of the sample interface. In the case of a DIY Raman system, a fiberoptic probe is the most versatile choice. Our laboratory probe makes it simple to measure solid and liquid samples, either non-contact inside of containers, or via immersion with a sealed immersion probe shaft. Accessories are available to couple the probe to vial and cuvette holders, microscope stages, flow cells, and other interfaces for the ultimate in sampling versatility.
785 nm Fiber Optic Probe Options
There are multiple configurations of our 785 nm fiber-optic Raman probe for use as part of our 785 nm DIY Raman kits. Explore your options below.
BAC100B Laboratory Probe - Standard Configuration
The BAC100B is our workhorse probe for DIY Raman kits.
All of our standard laboratory-grade Raman probes have the following common features:
We have four different configurations of our 785 nm BAC100B probe: Standard, Extended Range (E), and High Throughput (HT), and a combined E/HT option.
BAC100B Laboratory Probe - Extended Range Configuration
The Extended Range (E) option of our 785 nm BAC100B-E probe extends Raman data into the low frequency (LF), or terahertz (THz) Raman region. This LF data provides additional detail on structural differences between samples, beneficial in the identification of polymorphs. Our standard Raman probe has a Raman cut-off of 150 cm-1 and our ER Raman probe provides a cut-off of 65 cm-1.
BAC100B Laboratory Probe - High Throughput Configuration
Our High-throughput 785 nm BAC100B-HT probe option is compatible with our Exemplar HT Research-Grade spectrometers. With the use of a fiberoptic connector converter, this probe can also be used for our Exemplar T Professional Tier spectrometer. This probe can provide greater than a 35% increase in throughput.
Configurable Probe Shafts
Each 785 nm BAC100B Raman probe can be factory-configured with a range of probe shafts that allow for analyzing samples under a wide range of conditions. Probes with lengths less than 6 inches can be installed by users in the field. Longer probe shaft lengths require fine-tuning of the optical alignment using our Adjustable Shaft Adapter. All shafts are compatible with the standard, -E, and -HR configurations of the BAC100B Raman probe.
